
PV201砂巖環保防護劑(高滲透、速干型)

產品描述 Product Description
本產品是基于砂巖的物化特性而研制的針對性石材防水劑。由于PV201固含量較高,特別適用于較疏松的石材,如粉石,砂巖等。將防護劑噴涂于砂巖表面后能迅速吸收在砂巖表面,形成憎水防污性界面,不改變其原有透氣性。使用該產品不僅不改變石材表面色澤,而且能夠有效防止苔蘚、地衣及霉菌的生長,低溫也不會因吸水結冰膨脹而剝落。PV201可用于砂巖的六面處理,主體活性成份是美國FDA(美國食品醫藥局)認可物質。本產品固化后,無毒性,不會影響人體健康。
Based on physico-chemical characteristics of sandstone, the
product is developed with clear targets. Because of its high solid content,
this kind of product specially fits for sort of loose stone material such as
powdered-stone, sandstone etc. After painted on the surface of sandstone, the
protectant can be rapidly absorbed into sandstone , then forms an anti-stain
waterproof layer without altering stone’s original breathability. Using this
kind of product not only won't change stone’s color, but also it can
efficiently stop moss, lichen, mould from multiplying. Under low-temperature,
it won’t drops because of water freezing expansion. PV201 can be used to handle
sandstone all sides. It major active composition is authenticated by FDA (Food
and Drug Administration).After solidified, it’s non-toxic and will never do
harm to human health.
適用范圍 Application
砂巖制品等吸水性強的天然石材
Natural Stone with Strong Water Absorption, Such As
Sandstone
主要成分 Major composition
基于PV光觸媒的溶劑型納米硅基化合物為主要材料
solvent nano-silicon compounds based on PV-photocalalyst
產品特性 Property
外觀:無色透明油性液體
Appearance Transparent oil-based liquid
比重:0.80
Density 0.80
參考用量:(m2/L)5-15
Reference Amount 5-15 m2/L
防污性:☆☆☆☆☆
Anti-stain Ability ☆☆☆☆☆
防水性:☆☆☆
Waterproof Ability ☆☆☆
耐候性:☆☆☆☆☆
Weather Resistance Ability ☆☆☆☆☆
產品包裝 Product Package
標準包裝:5L/桶、20L/桶
Standard
Package 5L/bucket && 20/bucket
樣品包裝:250ml/瓶
Sample
Package 250ml/bottle
施工方法:Operation Method
1.
施工前,盡量保持石材的干燥和清潔,并使施工場所處于良好的通風。
2.
將防護劑用噴霧器噴涂或毛刷直接刷涂于石材表面。涂刷過程中,橫豎涂刷,避免遺漏,多次涂刷效果更佳。每公升防護劑可處理石材10-30平方米(具體視石材吸收率及表面情況而定)。對吸收率特大的石材可進行再次涂刷,但前提必須在待石材表面完全干燥后進行。
3.
本產品的防水效果在6小時后開始顯現,自然養護5天后防護效果達到******。
4.
本產品也可在低溫環境下使用,但須延長養護期。
5.
產品采用密封包裝,儲存期為2年。
6.
施工完1小時可裝箱。
1.
Before operation starts,
the surface of stone must be kept dry and clean. The site must be in good
ventilation
2.
Use vaporization to spray
on the stone surface or brush on it directly. During its brushing process, move
the brush from right to left ,top to bottom to avoid missing somewhere, the
effect must be better if stone is brushed several times. Every liter of
protectant can deal with stone surface 10 to 30 square meters. (The accurate
usage amount depends on the absorptivity and condition of stone surface) As for
stone surface with specially high absorptivity, brush it again in condition
that the stone surface is completely dried after first process.
3.
The waterproof
performance appears after 6 hours. The protective effect will be perfect after
five-day natural maintenance.
4.
The product can be used
under low-temperature environment but there is a need to extend the maintenance
period.
5.
Apply sealed package.
Have 2-year storage life.
6.
The stone can be encased
after the operation finishes for 1 hour.
注意事項:Notes
1.
本產品開封后,不使用時應立即將桶蓋擰緊,減少揮發。
2.
注意在施工過程要防止過分暴曬,否則將影響產品的整體效果,阻礙防護劑滲透。
3.
建議對不熟悉的石材可試先做個試驗,并讓其反應24小時。
4.
禁止明火
5.
放置兒童不可觸及處。
6.
不放置于高酸環境中,禁止與任何苛刻化學品接觸及清洗。
1.
After It's opened ,
wrench the lid tightly when it isn't in use to reduce volatilization.
2.
Avoid overexposure during
its operating process, otherwise, it will affect the overall effect of product.
3.
As for unfamiliar stone,
propose to make a sample test in advance. 24 hours at least for reaction.
4.
No open flames
5.
Be kept out of the reach
of children.
6.
Don't put it in
high-alkali circumstance. Forbid to touch any kind of harsh chemicals or be
washed by it.